How Much Does Siding Replacement Cost?
$7,000 – $20,000
National average: $11,500
Interactive worksheet
Siding replacement cost calculator
Set the scope, size, and state — the tally updates as you go. Built from this guide's figures and BLS state wage data.
01 Quality & scope
02
03
State figures apply BLS construction wages (2025) at a 60% labor weight — how we estimate.
Your estimate
- Labor ≈60%
- $6,900
- Materials & equipment
- $4,600
- Planning range
- $10,350 – $12,650
low $7,000 $20,000 high
U.S. construction trades average $65,360/yr (BLS 2025).
Get three written bids. One far under $9,200 usually means missing scope — ask what's not included. Far over $14,000, ask what's driving the number.
More Exterior & Curb Appeal: Exterior Painting ·Stucco ·Garage Door Replacement ·Foundation Repair
New siding is one of the most transformative exterior projects — it overhauls curb appeal, seals out weather, and signals a cared-for home. Replacing it costs $7,000 to $20,000 for an average home in 2026, averaging around $11,500, with material driving most of the range.
What you’re paying for
Your quote covers siding material, labor, house wrap and trim, and removal of the old siding. The wildcard, as with roofing, is what’s underneath: tear-off can reveal rotted sheathing or moisture damage that must be repaired before the new siding goes on.
Cost by material
Material is the biggest decision and the biggest price swing — a 5–10× difference between basic vinyl and masonry veneer. The table below shows typical installed pricing per square foot.
Vinyl vs. fiber cement
These are the two most common choices. Vinyl is the value champion: cheapest, maintenance-free, available in many colors. Fiber cement (James Hardie is the best-known brand) costs more but is tougher, fire-resistant, holds paint beautifully, and tends to recoup more at resale. In wildfire-prone or harsh climates, fiber cement’s durability often justifies the premium.
Don’t forget tear-off and repairs
Two line items shape the final bill: removing the old siding ($1,000–$3,000) and repairing any damaged sheathing found underneath. A reputable contractor inspects and quotes a per-sheet repair rate upfront rather than springing it on you mid-job.
How to save on siding
- Choose vinyl for the lowest cost, or insulated vinyl for a modest efficiency bump.
- Get three quotes and confirm each includes tear-off, wrap, and trim.
- Bundle with windows if you’re replacing those too, to share setup.
- Address moisture issues properly so you’re not residing again in a few years.
| Component | Typical range | Notes |
|---|---|---|
| Siding material | $3 – $13 / sq ft | – |
| Installation labor | $2.50 – $5 / sq ft | – |
| Old siding removal | $1,000 – $3,000 | – |
| House wrap & trim | $1,000 – $4,000 | – |
| Repairs to sheathing | varies | If rot is found |
| Option | Typical range | Notes |
|---|---|---|
| Vinyl | $3 – $8 / sq ft | Most affordable |
| Engineered wood | $5 – $12 / sq ft | – |
| Fiber cement (Hardie) | $6 – $13 / sq ft | Durable, fire-resistant |
| Insulated vinyl | $7 – $12 / sq ft | – |
| Natural wood | $7 – $15 / sq ft | – |
| Brick / stone veneer | $15 – $30 / sq ft | – |
What affects the price
- Material Vinyl is the budget option; fiber cement, wood, and masonry veneer cost progressively more.
- Home size & stories More wall area and added height (scaffolding) raise both material and labor.
- Old siding removal Tearing off and disposing of existing siding adds $1,000–$3,000.
- Architectural complexity Dormers, gables, and intricate trim slow installation and raise labor.
- Hidden repairs Rotted sheathing or moisture damage found during tear-off adds cost.
Siding replacement cost by state
Where you live moves the price as much as any option you pick, because labor is a big share of the bill and construction wages differ sharply by state. Adjusted with BLS wage data (2025), a typical siding replacement job runs about $8,200 – $23,400 in Hawaii (+17%) versus $6,000 – $17,000 in Arkansas (−15%).
See the typical range in all 50 states + D.C.
| State | Typical range |
|---|---|
| Alabama | $6,100 – $17,400 |
| Alaska | $8,000 – $23,000 |
| Arizona | $6,700 – $19,000 |
| Arkansas | $6,000 – $17,000 |
| California | $7,800 – $22,400 |
| Colorado | $7,000 – $20,000 |
| Connecticut | $7,500 – $21,400 |
| Delaware | $6,900 – $19,600 |
| District of Columbia | $7,600 – $21,600 |
| Florida | $6,400 – $18,200 |
| Georgia | $6,400 – $18,400 |
| Hawaii | $8,200 – $23,400 |
| Idaho | $6,600 – $18,800 |
| Illinois | $8,000 – $23,000 |
| Indiana | $7,100 – $20,200 |
| Iowa | $6,800 – $19,400 |
| Kansas | $6,700 – $19,000 |
| Kentucky | $6,500 – $18,600 |
| Louisiana | $6,300 – $18,000 |
| Maine | $6,900 – $19,600 |
| Maryland | $7,000 – $20,000 |
| Massachusetts | $8,000 – $23,000 |
| Michigan | $7,000 – $20,000 |
| Minnesota | $7,600 – $21,800 |
| Mississippi | $6,100 – $17,400 |
| Missouri | $7,100 – $20,400 |
| Montana | $6,900 – $19,600 |
| Nebraska | $6,600 – $18,800 |
| Nevada | $7,200 – $20,600 |
| New Hampshire | $6,900 – $19,800 |
| New Jersey | $8,000 – $22,800 |
| New Mexico | $6,400 – $18,400 |
| New York | $7,700 – $22,000 |
| North Carolina | $6,300 – $18,000 |
| North Dakota | $7,100 – $20,200 |
| Ohio | $7,000 – $20,000 |
| Oklahoma | $6,400 – $18,200 |
| Oregon | $7,700 – $22,000 |
| Pennsylvania | $7,100 – $20,200 |
| Rhode Island | $7,300 – $20,800 |
| South Carolina | $6,400 – $18,200 |
| South Dakota | $6,300 – $18,000 |
| Tennessee | $6,400 – $18,400 |
| Texas | $6,400 – $18,200 |
| Utah | $6,600 – $18,800 |
| Vermont | $6,800 – $19,400 |
| Virginia | $6,700 – $19,000 |
| Washington | $8,100 – $23,200 |
| West Virginia | $6,700 – $19,000 |
| Wisconsin | $7,300 – $20,800 |
| Wyoming | $6,900 – $19,800 |
Estimates apply each state's BLS construction-wage multiplier to this guide's national range, a planning number, not a quote. Browse the full state cost guides or our methodology.
Frequently asked questions
- How much does siding cost per square foot?
- Installed, vinyl runs $3–$8, fiber cement $6–$13, wood $7–$15, and brick or stone veneer $15–$30 per square foot. A typical 1,500-square-foot home runs $7,000–$18,000.
- What's the cheapest siding to install?
- Standard vinyl siding is the most affordable durable option at $3–$8 per square foot installed, which is why it's the most common choice.
- Vinyl vs. fiber cement — which is better?
- Vinyl is cheaper and maintenance-free; fiber cement (like James Hardie) costs more but is more durable, fire-resistant, and holds paint well. Fiber cement also tends to recoup more at resale.
- Does new siding add home value?
- Yes — exterior replacements like siding consistently rank among the better resale investments because they transform curb appeal and signal a well-maintained home.
- How much does it cost to remove old siding?
- Tear-off and disposal typically add $1,000–$3,000, depending on the material being removed and the home's size.
- How long does siding last?
- Vinyl lasts 20–40 years, fiber cement 30–50, wood 20–40 with maintenance, and brick or stone veneer often a lifetime.
- Is insulated vinyl siding worth it?
- Insulated vinyl costs more ($7–$12/sq ft) but adds R-value and rigidity, modestly improving energy efficiency and impact resistance — worthwhile in harsh climates.
How we estimate: ranges reflect typical U.S. pricing for materials and professional installation, compiled and cross-checked against the current (2026) industry sources listed below (see our data & methodology). Your actual cost depends on your location, project size, material grade, and local labor rates — always get multiple written quotes before you commit.
Sources
Cost ranges on this page were checked against current (2026) data from these industry sources:
- How Much Does Vinyl Siding Cost to Install? (2026 Data) — Angi
- How Much Does Vinyl Siding Cost? (2026) — HomeGuide
- Siding Replacement Cost (2026 Pricing) — This Old House